Logic receiver includes rack hardware and detachable antennas for easy set-up and unprecedented simplicity with features including Automatic Frequency Selection and Automatic Transmitter Set-Up, and microprocessor-controlled diversity.

Main Features

  • Automatic Frequency Selection
  • Automatic Transmitter Setup
  • Detachable 1/4 wave antennas
  • Microprocessor-controlled diversity
  • Multi-function, backlit LCD
  • Low battery indicator
  • Rugged metal chassis
  • 1/2 rack design

Description

The SLX4L wireless receiver offers unprecedented simplicity with features including Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box. Other features include a backlit LCD screen which provides group, channel and antenna information. A five segment audio meter lets you monitor the incoming audio signal from the transmitter. The SLX4L also includes logic output for use with software echo cancellation and remote battery life monitoring. Logic-enabled transmitters include MX690 and MX890.

Sets containing this receiver

Furnished Accessories

Amount Part Title
1 Power supply Part PS24
1/4 Wave Antennas
BNC Cables
1 BNC Bulkhead Adapter
1 Rackmount Kit
1 Rackmount Bracket-Long
1 Rackmount Bracket-Short
1 Link bar
Protective bumpers

Available Variants

Specs

Technical specifications

Weight:
816 g
Height x Width x Depth:
42.0 × 197.0 × 134.0 mm
Transmission:
Analog
Type of Power Supply:
External
Receiver Housings:
Metal
Active Antenna Possible:
Optional with UABiasT
Bias via BNC:
No
Encryption:
No
High Density Mode:
No
Interference Detection:
No
Remote Control:
No
Number of compatible systems info:
14
DANTE-Enabled Products:
No
Scan Features:
Channel Scan
Sync Features:
IR Sync
Detachable Antennas:
Yes
Network ability:
No
Software control :
No
Logic:
Yes
Cascade:
No
Rack Hardware:
Included Rack mounts brackets
Receiver Displays:
Backlit LCD
Receiver type:
Single
Included antenna:
External 1/4-wave
Battery Status:
Leveled battery life indication
Line Mic Switch:
No
Image Rejection:
70 dB, typical
RF Sensitivity:
-105 dBm, for 12dB SINAD, typical
Phantom Power Protection:
No
Antenna Input Impedance:
50 Ω

Further Technical Specifications

Further Specs:
  • Audio Output Level : XLR connector (into 600 Ω load): –13 dBV, 1/4 inch connector (into 3000 Ω load): –2 dBV
  • Output Impedance:  XLR connector: 200 Ω,  1/4 inch connector: 1kΩ
  • Sensitivity:  -105 dBm for 12 dB SINAD, typical
  • Image Rejection:  >70 dB, typical
  • Operating Range Under Typical Conditions: 100m (300 ft.)
  • Audio Frequency Response (+/– 2 dB):   Minimum: 45 Hz   Maximum: 15 kHz 

Logic Connections

  • Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC
  • Pin 2: Logic ground
  • Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC

Downloads

Comparable products

Optional accessories